| Document Revision History |
 | SUB-20 Layout |
| GPIO Header |
| SPI Header |
| DB9 Connector |
| RS485 Connector |
| Jumpers, SW1,SW2 |
| Power Distribution |
| SUB-20 API |
| Device Initialization |
| sub_find_devices |
| sub_open |
| sub_get_serial_number |
| sub_get_product_id |
| sub_get_version |
| sub_reset |
| Internal EEPROM Functions |
| sub_eep_read |
| sub_eep_write |
| I2C functions |
| sub_i2c_freq |
| sub_i2c_config |
| sub_i2c_start |
| sub_i2c_stop |
| sub_i2c_scan |
| sub_i2c_read |
| sub_i2c_write |
| sub_i2c_hs_rw |
| I2C Status |
| Bit-bang I2C Masters |
| sub_bb_i2c_config |
| sub_bb_i2c_scan |
| sub_bb_i2c_read |
| sub_bb_i2c_write |
| SPI Functions |
| sub_spi_config |
| sub_spi_transfer |
| sub_spi_transfer_ess |
| sub_sdio_transfer |
| MDIO Functions |
| sub_mdio22 |
| sub_mdio45 |
| sub_mdio_xfer, sub_mdio_xfer_ex |
| GPIO Functions |
| sub_gpio_config |
| sub_gpio_read |
| sub_gpio_write |
| sub_gpiob_config |
| sub_gpiob_read |
| sub_gpiob_write |
| Edge Detector |
| sub_edge_config |
| sub_edge_read |
| Fast PWM |
| sub_fpwm_config |
| sub_fpwm_set |
| PWM |
| sub_pwm_config |
| sub_pwm_set |
| Analog to Digital Converter - ADC |
| sub_adc_config |
| sub_adc_single |
| sub_adc_read |
| LCD Functions |
| sub_lcd_write |
| RS232 RS485 Functions |
| sub_rs_set_config |
| sub_rs_get_config |
| sub_rs_timing |
| sub_rs_xfer |
| FIFO, Streaming, Slave Modes |
| FIFO Functions |
| sub_fifo_config |
| sub_fifo_write |
| sub_fifo_read |
| SPI Slave |
| I2C Slave |
| Error Codes |
| sub_errno |
| sub_strerror |
| Electrical Characteristics |
| Absolute Maximum Ratings |
| DC Characteristics |
| AC Characteristics |
| Ordering Information |
Got to SUB-20 page
© 2012 xdimax.com