DMX-10
Low Cost PCIEx I2C/SPI/GPIO Interface Adapter.
|
ORDER NOW
|
|
|
|
DMX-10 low cost PCIEx Interface Adapter provides simple and versatile
solution to get instant access to various parallel and serial interfaces
like I2C, SPI, SMBUS and others.
|
-
Flexible multi-level I2C interface with configurable up to 2Mbps i2c bus clock
(including fast mode 400 Kbps & standard mode 100 Kbps i2c bus clock rates).
-
Up to 10Mbps Slave and Master SPI interface with configurable phase, polarity and frequency.
-
General Purpose Input/Output (GPIO) pins control.
-
Field upgradable.
-
Linux/Windows/DOS/MacOS/embedded OS support.
-
Flexible and powerful API for custom software development without any
kernel mode driver.
-
Wide range of I/O signal levels to suite target requirements
|
|
General
Description |
DMX-10 is, all-in-one ready to use
PCIEx to I2C/SPI/GPIO Interface adapter based on
system with FPGA and 1x PCIEx PHY.
DMX-10 converts PCIEx transactions into the I2C, SPI master or slave
transactions and GPIO control functions.
DMX-10 turns your PC running Windows, DOS, Linux, MacOS or any
embedded OS with PCI support into comprehensive
general purpose bus master or slave adapter.
|
|
Features |
-
DMX-10 I2C/SPI/GPIO Interface Adapter supports variable and
configurable I2C bus speed modes.
-
2000 Mbit/s maximal supported I2C bus speed.
-
400kBit/s fast mode.
-
100kBit/s standard mode.
-
Configurable I2C bus master clock speed in range of 400Kbps to 1Kbps.
-
Zero latency and no delay in back to back transactions.
PCIEx transactions at 2.5Gbps can be fully neglected
(compared to relatively slow I2C and SPI bus frequencies)
in latency and back to back bandwith calculations.
-
I2C bus protocol Multi Master arbitration support.
-
I2C Bus Clock Synchronization (Clock Stretching) support.
To communicate with relatively slow I2C slave devices,
DMX-10 I2C bus master supports clock stretching.
-
SPI Interface Support.
-
SPI Master and Slave transactions support.
-
Configurable SPI bus clock polarity, phase and frequency.
-
Field upgradable.
DMX-10 FPGA can be uploaded with new image without
removing DMX-10 board from your PC. This feature allows Dimax
to make fast DMX-10 customization.
-
Whide range of input/output signal levels.
-
Flexible I2C pull-ups configuration.
-
I2C pull-ups enable/disable.
-
external/internal I2C bus voltage.
-
Compatible with PCIEx 1.0 Specification
-
Windows 98/2000/XP, DOS, Linux, MacOS, embedded OS Support.
-
Dimax API supports a number of DMX-10 devices working simultaneously.
|
|
Block
Diagram |
|
|
Applications |
-
Development and Testing Equipment.
-
I2C EEPROM, SPI EEPROM, ICP (In-Circuit Programming) Capable
Microcontroller Programmer.
-
Mass Production Host Systems.
-
PC Based Monitoring Systems.
-
I/O Controllers.
|
|
Support |
|
|
Buy
online |
Product
Type |
Product
Status |
Price |
Buy Now |
DMX-10 PCIEx-I2C/SPI/GPIO
Interface Adapter
|
Back Order |
Contact Us
|
Contact Us
|
|
|
Warranty |
The DMX-10 units are unconditionally guaranteed by
Dimax. If DMX-10 has not performed to your satisfaction, you can simply return
the undamaged unit within 60 days period with the original sales receipt to the
distributor from whom the unit was purchased and your money will be promptly
refunded. Refund do not include shipment costs. You can also request the
exchange of your broken (not properly working unit) with new one. This warranty
applies only during normal use and care and is absolutely void if the product
is misused, neglected, damaged, altered, or repaired by someone other than
Dimax.
|
|
Translations |
All translations are provided by "Google Language Tools" for reference only.
Dimax has no responsibility for translations and no rights can be derived from
any translation on this web site
|
|