CoolEx Digital, Analog, PWM I/O Extender with Modbus interface

CoolEx

Digital, Analog, PWM I/O Extender with Modbus interface

ORDER NOW

General Description	Features	Block Diagram	Compatibility List
SW Tools & Utilities	Downloads	Documentation	Applications
Email Support	Order On-line	Warranty	Related Products

Comprehensive and Versatile I/O Extender for Modbus capable automation systems

Full compliance with Modbus RTU Specification
Six variable 0-10V Analog Outputs
Six Frequency and Duty Cycle configurable PWM's
Digital (on/off) Inputs and Outputs
Connection to VRV/VRF Air Conditioning System Line
Customizable for specific user applications

General Description

CoolEx is a Modbus I/O extender with analog, digital and PWM inputs and outputs. CoolEx can be used in conjunction with Programmable Logic Controller (PLC) or any other Modbus master that requires some extra I/O or special I/O functionality. CoolEx is controlled by master by means of standard Modbus requests defined in "Modbus Application Protocol Specification".
CoolEx physical connection to MODBUS is Two-Wire EIA/TIA-485 standard interface recommended by "Modbus over Serial Line Specification and Implementation Guide". A number of CoolEx devices can be connected to single 2W-bus. To utilize CoolEx with TCP/IP Modbus master over Ethernet network MODBUS 485RTU/TCP Gateway can be used.

Features

Six independent variable analog outputs with 0-10V output range.
Output Voltage is determined by corresponding holding register. Output current is up to 40mA. Analog output can be directly connected to voltage controlled device like Fan Drive, Pump Drive, Torque Drive, FRG, Voltage to Frequency converter and so on.
Six PWM Outputs with variable frequency and duty cycle.
Frequency and duty cycle controlled independently for each PWM Output via corresponding holding registers.
Digital Inputs and Outputs with 5V or 12V logic one level.
Can be connected to Dry Contacts, Dampers, Valves, Pumps, etc...
Fully compliant with MODBUS Specifications.
Connectivity to Air Conditioning (AC) System Line.
For special custom applications CoolEx can be connected to VRV/VRF Air Conditioning System Line to provide basic AC control and monitoring functions.
Field upgradable and customizable.
Firmware (FW) can be fully upgraded by customer without any need to open unit or send it to manufacturer. Upon request XDIMAX can develop and provide unique customized FW to suite specific end user requirements.

Block Diagram

Documentation

Email Support

Order On-line

Type Number	Product Status	Price	Buy Now
CoolEx-A45 CoolEx-A412 CoolEx-D45 CoolEx-D412	In Stock	Request Quotation Skype Chat